Lynton Power Flushing

Local Lynton Radiator Flush Specialists

Experience the benefits of power flushing, a thorough cleansing process designed to eliminate sludge, rust and debris from your central heating system.

Neglecting these contaminants can severely hamper your heating system's efficiency so contact us today for top-notch power flushing services in Lynton.

When to order a power flush service

Recognising the signs of a system in need of maintenance is crucial to ensure optimal performance. If you're experiencing any of the following indicators, it may be time for a power flush:

  • Radiators have cold spots, especially at the bottom
  • Frequent need for bleeding the radiators
  • Unusual noise emanating from the boiler or radiators
  • Some radiators leaking
  • Frequent system breakdowns
  • Boiler constantly needs to be restarted
  • Certain radiators struggle to heat up compared to others
  • The central heating takes a long time to heat up
  • Discoloured water when bleeding the radiators
  • Radiators feeling cold while pipes remain hot

AB Engineering SW Ltd are your local power flushing experts. We use cutting-edge, professional equipment to conduct comprehensive diagnostics, determining whether your heating system requires a thorough flush.


When you contact our team of heating engineers, we are committed to responding promptly.

We aim to reach all callouts within 24 hours.

How does Radiator Flushing Work?

Radiator flushing serves the primary purpose of restoring the smooth circulation of water throughout the central heating system. Notably, this service also has the added benefit of mitigating noise emanating from the boiler and pump. Therefore, to achieve optimal results, it is advisable to perform a comprehensive system flush.

Our skilled heating engineer will use a powerful high flow/low-pressure pumping unit, we use the Norstrom pro flush, to connect to the central heating system. This connection is made either to the circulation pump in conventional boiler systems or the pump head in combination boilers. Using powerful cleansing agents, we thoroughly flush any contaminants from the system.

What chemicals are used in a powerflush?

The chemical agents used in a power flush consist of a sludge crust breaker and remover, a descaler for breaking down limescale and a corrosion inhibitor to prevent further rust formation. The crust breaker and remover are acid-based, effectively disintegrating rust and other debris that may have accumulated within radiators, pipes and the boiler.

It's important to note that, by the end of the process, no residual acid will remain in your central heating system's water.

Lynton Radiator Power Flushing Company

The Benefits of Power Flushing

When it comes to power flushing your central heating, you get the following benefits:

  • Enhances the efficiency & reliability of your heating system.
  • Minimises the risk of future boiler breakdowns.
  • Gives a potential reduction in your energy bills.
  • Prolongs the lifespan of your pipes & radiators.
  • Mitigates the threat of rust & corrosion to vital components.
  • Prevents & eliminates blockages in your system.
  • Guarantees radiator performance without any cold spots.
  • Improves water flow rate throughout the heating system.
  • Reduces noise emanating from boilers and radiators.

Recommended Power Flushing Experts Lynton

Trusted Lynton Radiator Flush Contractors

Power flushing is an essential cleansing procedure for your boiler and central heating system, designed to eliminate the build-up of sludge, dirt, rust and debris that accumulates over time.

When these contaminants linger within your heating system, they can lead to blockages, corrosion and a decline in boiler efficiency, ultimately increasing the likelihood of breakdowns.

Recognising the signs of a system in need of maintenance is crucial to ensure optimal performance. If you're experiencing any of the following indicators, it may be time for a power flush:

  • Radiators have cold spots, especially at the bottom.
  • Frequent need for bleeding the radiators.
  • Unusual noise emanating from the boiler and radiators.
  • Radiator leaks.
  • Frequent system breakdowns.
  • Boiler constantly needs to be restarted.
  • Certain radiators struggle to heat up compared to others.
  • The central heating system takes a long time to heat up.
  • Discoloured water when bleeding the radiators.
  • Radiators feel cold while pipes remain hot.

Why choose us?

We receive a lot of work from recommendation by existing customers, which shows how much you can rely on our expertise and professionalism.

  • OFTEC and Gas Safe Registered
  • Established locally since 1993
  • Rapid response from a local firm
  • Full liability insurance
  • Competitive price quotes
  • Boiler manufacturer warranties
  • Trusted family-run business
  • Honest and straightforward advice
  • Most repairs completed the same day

Radiator Power Flush FAQs

How does it work?

After you call us or fill out the contact form:

  1. We schedule a convenient 2-hour time slot for your appointment*
  2. We provide an estimate of the expected duration of the work
  3. We offer expert advice and recommendations based on your needs
  4. We provide you with a clear and transparent price quote
  5. The team maintains the utmost accuracy and security with your data

The engineer visit

When our heating engineer arrives at your location, they will be punctual and ready to commence work. For full peace of mind, they will also present their ID.

Upon completion, we clean and tidy the areas where we have been working. The engineer can address any questions you have, plus provide you with contact details for any further inquiries.

*Please note that while our engineers strive to adhere to the 2-hour booking slot, unforeseen delays due to road conditions or inclement weather, beyond our control, may occasionally occur.

Get in Touch Today

"*" indicates required fields

Drop files here or
Accepted file types: jpg, jpeg, png, gif, webp, bmp, pdf, Max. file size: 15 MB, Max. files: 5.
    This field is for validation purposes and should be left unchanged.

    Looking for services other than a radiator power flush in Lynton?

    We provide a whole range of heating engineer services throughout the Devon area:

    Not based in Lynton EX35? Still looking for a 'Central heating flush'?

    Our radiator power flush services are available in many other areas around Devon:


    Parracombe, Brendon, Filleigh